Mop Holder

I made this adaptation to the broom I have at home to be able to use it as a mop since with this pandemic we are experiencing, you cannot go out and make any purchases. I hope it is useful to you.

#STAY AT HOME

Review the Solidworks file and adapt it as needed

I have printed this file in black PLA, on an Ender 3 Pro printer, with 0.5mm nozzle and 0.2mm layer height.

1 Drill

1 2.5mm drill bit

2 pieces 3D printed

2 screws 30mm long

2 holes are drilled, one 4cm from each edge of the mop

The two printed pieces are placed in each hole with a screw, as shown in the photo.

The mop is placed in the bras, as shown in the photo.