Money Box Made From Scrap Material
by guyflagg in Workshop > Home Improvement
3612 Views, 9 Favorites, 0 Comments
Money Box Made From Scrap Material
In this project I took scrap materials:
Wood
Acrylic
to make a box for collecting money for prints that are done at the TechShop Soma.
I found a scrap piece of wood, that was a piece cut from the table saw, so it was square so it would only require table saw and chop saw to cut to correct lengths.
After the 4 sided cube was assembled, an acrylic scrap piece was used for the last two sides of the cube. This acrylic piece was cut on the laser cutter with holes for screws, and a slot for money to be inserted to pay for prints. A cool clip art image of a printer was used to make it even cooler!
Materials needed for full assembly:
wood
acrylic
4 screws
brad nails
Tools needed to cut and assemble:
Air brad nailer
laser cutter
table saw
chop saw
power drill
Wood
Acrylic
to make a box for collecting money for prints that are done at the TechShop Soma.
I found a scrap piece of wood, that was a piece cut from the table saw, so it was square so it would only require table saw and chop saw to cut to correct lengths.
After the 4 sided cube was assembled, an acrylic scrap piece was used for the last two sides of the cube. This acrylic piece was cut on the laser cutter with holes for screws, and a slot for money to be inserted to pay for prints. A cool clip art image of a printer was used to make it even cooler!
Materials needed for full assembly:
wood
acrylic
4 screws
brad nails
Tools needed to cut and assemble:
Air brad nailer
laser cutter
table saw
chop saw
power drill