Money Saving Machine

This is how to make a money saving machine in tinkercad with electric motors. When you feed money in the machine the first motor grabs the money and then two rollers grab the money and feed it into a container for saving the money

click edit grid in tinkercad and make grid 600mmx600mm

Take a box out of basic shapes in tinkercad and scale it to 400mm long 120mm wide and 20mm tall.

Take a box out of basic shapes and scale it to 53mm tall 49mm wide and 120mm long we will be calling it box #1.

Take a box out of basic shapes and scale it to 103mm tall 35mm wide and 98mm long we will be calling it box #2 and make it into a hole.

Select box #1 and box #2 then align them in the middle.

Then group box #1 and #2.

Then turn 90 degrees we will be calling this piece mechanism box.

Take a cylinder from basic shapes and scale it 115mm tall and diameter 20mm we will be calling it cylinder #1.

Take a cylinder from basic shapes and scale it to 151mm tall and diameter 5.77 we will be calling cylinder #2.

align cylinder #1 and cylinder #2 in the middle.

Move cylinder #1 up 10mm.

Group cylinder #1 and cylinder #2 we will be calling this piece roller.

Turn roller 90 degrees.

Align roller in the middle of the mechanism box.

Move roller up 25mm.

Duplicate roller then move it down 25mm.

Get a useful gear from all shapes on page 3 in tinkercad.

Turn gear 90 degrees.

Align gear with roller in the middle.

Move gear until it is 1mm from the mechanism box.

Duplicate gear then move it up 25mm and group.

Take a cylinder out of basic shapes and scale it to 18mm tall and diameter 34mm.

Take a cylinder and scale it to 44mm tall and 7mm diameter.

Select both motor cylinder #1 and motor cylinder #2 and align them in the middle and group we will be calling this piece motor.

Turn motor 90 degrees.

Align motor and mechanism box in the middle.

Move motor up 63mm.

Align motor and mechanism box then ungroup mechanism box.

Move motor to the right 60mm

Click the gear below the motor and duplicate it then move it up 28mm then group.

Get a motor from components in tinkercad.

Turn motor 90 degrees.

Turn motor 120.5 degrees set aside.

Get a box from basic shapes and scale it to 20mm tall 20mm wide and 5mm wide

Move motor mount up 50mm.

Align motor mount with mechanism box in this way move it to the right 30mm then group.

Align motor in this way then move motor to the right 15mm and move it up 15mm and group.

Align mechanism box with main box in like this.

Move mechanism box up 15mm.

Move mechanism box backwards 60mm and group.

Get a box out of basic shapes and scale it to 76mm long 10mm wide and 3mm tall we will be calling this piece money grabber.

Turn money grabber 45 degrees.

Align money grabber and mechanism box like this.

Move money grabber up 35mm.

Move money grabber forward 28mm.

Move money grabber to the left 28mm and group.

Get a box out of basic shapes and scale it to 20mm tall 10mm wide and 120mm long.

Turn money ramp -45 degrees.

Align money ramp with mechanism box like this.

Move money money ramp up 14mm and backwards 57mm and group with mechanism box

Get a box and scale it to 120mm wide 278mm long75mm tall and set it aside we will be calling this piece money box.

Get box and scale it to 65mm tall 260mm long and 120mm wide then make it into a hole then move it 6mm above the work plane.

Align money box hole and and money box in the middle then move money box hole forwards 10mm and group money box hole and money box.

Align money box and mechanism box like this then group.

Get a box and scale it to 54mm wide 65mm long and 55mm tall then move piece down 10mm then align it like this and group.

Get a box and scale it to 38mm tall 4mm wide and 73mm tall this we will call this piece money guide next align it like this then move it to the right 20mm then duplicate money guide and bring it over to the other side and group.

congratulations you have completed your money saving machine