Modular Hydroponics - Flood and Drain Seedling Protector/Terrarium Dome

by wiley coyote in Workshop > Hydroponics

21596 Views, 28 Favorites, 0 Comments

Modular Hydroponics - Flood and Drain Seedling Protector/Terrarium Dome

seedling protector 018.jpg
This a relatively simple modification to the planter described in Modular, Windowsill, Air Powered, Hydroponics Herb Garden/Experimenter, step 6.

I have a problem with my seedlings being eaten by cats when indoors and being destroyed by high winds when outdoors on my balcony. To prevent either of these things from happening I have used 2L Pepsi and 2L Coke bottles in conjunction to make this. It can also be used as a terrarium for small plants or seedlings.

What You Need

seedling protector 001.jpg
1 ea 2L Pepsi bottle
1 ea 2L Coke bottle
1 ea Utility knife
1 ea Drill
1 ea 1/8 inch drill bit

What You Do

seedling protector 004.jpg
seedling protector 006.jpg
seedling protector 008.jpg
seedling protector 009.jpg
seedling protector 015.jpg
seedling protector 017.jpg
seedling protector 018.jpg
seedling protector 019.jpg
1. Cut the bottom off of the Coke bottle.

2. Drill holes in bottom, invert and place in bottle top as shown. Planter done.

3. Cut Pepsi bottle in half.

4. Place top half of the Pepsi bottle onto the planter, sliding one bottle inside the other like a sleeve.

5. Fill with grow medium, plant plant/seed/install dome and wait.

Note - To have sleeve slide down the outside of the planter, rather than the inside. Make the Pepsi bottle into the planter and the Coke bottle into the sleeve/dome.