Modified Two-strand Diamond Knot
![0511211047-00.jpg](/proxy/?url=https://content.instructables.com/FMO/FTJQ/KOK1MS4X/FMOFTJQKOK1MS4X.jpg&filename=0511211047-00.jpg)
This is an attractive substitute for the standard 2-strand diamond knot.
It is ABOK 787 with two extra tucks
![0511211048-00.jpg](/proxy/?url=https://content.instructables.com/FAJ/UH5G/KOK1MS83/FAJUH5GKOK1MS83.jpg&filename=0511211048-00.jpg)
Middle your cord and make a small bight.
![0511211049-00.jpg](/proxy/?url=https://content.instructables.com/FX2/HODF/KOK1MS4W/FX2HODFKOK1MS4W.jpg&filename=0511211049-00.jpg)
Make a smaller bight.
![0511211049-01.jpg](/proxy/?url=https://content.instructables.com/FQM/TR13/KOK1MS4V/FQMTR13KOK1MS4V.jpg&filename=0511211049-01.jpg)
Place the smaller bight on top as shown.
![0511211050-00.jpg](/proxy/?url=https://content.instructables.com/FN9/0FHS/KOK1MS4U/FN90FHSKOK1MS4U.jpg&filename=0511211050-00.jpg)
Bring the left hand strand under . . . .
![0511211050-01.jpg](/proxy/?url=https://content.instructables.com/FUH/BGZO/KOK1MS4T/FUHBGZOKOK1MS4T.jpg&filename=0511211050-01.jpg)
![0511211051-00.jpg](/proxy/?url=https://content.instructables.com/F2P/82KY/KOK1MSNS/F2P82KYKOK1MSNS.jpg&filename=0511211051-00.jpg)
. . . . Then over, under over. Tighten.
![0511211053-00.jpg](/proxy/?url=https://content.instructables.com/F1B/AGJ4/KOK1MS4R/F1BAGJ4KOK1MS4R.jpg&filename=0511211053-00.jpg)
Take the lower strand and bring it up through the next hole to its right.
![0511211053-01.jpg](/proxy/?url=https://content.instructables.com/FCE/RQ88/KOK1MS4Q/FCERQ88KOK1MS4Q.jpg&filename=0511211053-01.jpg)
Do the same with the other strand.
![0511211054-00.jpg](/proxy/?url=https://content.instructables.com/F9G/YICE/KOK1MS4P/F9GYICEKOK1MS4P.jpg&filename=0511211054-00.jpg)
Tighten.
![0511211054-01.jpg](/proxy/?url=https://content.instructables.com/FQA/AK43/KOK1MS4O/FQAAK43KOK1MS4O.jpg&filename=0511211054-01.jpg)
Take either strand and bring it over two and up trough the center of the knot.
![0511211055-00.jpg](/proxy/?url=https://content.instructables.com/F78/TZDW/KOK1MS4N/F78TZDWKOK1MS4N.jpg&filename=0511211055-00.jpg)
Do the same with the other strand.
![0511211055-01.jpg](/proxy/?url=https://content.instructables.com/F4A/V1OE/KOK1MS4M/F4AV1OEKOK1MS4M.jpg&filename=0511211055-01.jpg)
Grab the loop in one hand and the two strands in the other and pull apart gently. Squeeze the knot gently.
![0511211055-02.jpg](/proxy/?url=https://content.instructables.com/F6F/UDGK/KOK1MS4L/F6FUDGKKOK1MS4L.jpg&filename=0511211055-02.jpg)
![0511211057-00.jpg](/proxy/?url=https://content.instructables.com/FH0/H8CW/KOK1MS4K/FH0H8CWKOK1MS4K.jpg&filename=0511211057-00.jpg)
Tighten the knot one strand at a time. Now is the time to determine the size of the finished loop.