ABOK 784 (aka Modified ABOK 784)
![P1010004 (1).JPG](/proxy/?url=https://content.instructables.com/FEZ/5VD0/KIHF8SQK/FEZ5VD0KIHF8SQK.jpg&filename=P1010004 (1).JPG)
This is how the finished drawing of ABOK appears in the book.
There was a mistake in the layout drawing which is corrected here.
Thanks to Whyknot for showing how to do it.
Use as a zipper pull, key ring fob, lanyard
![P1010003 (1).JPG](/proxy/?url=https://content.instructables.com/F91/ZAJE/KI34UZVD/F91ZAJEKI34UZVD.jpg&filename=P1010003 (1).JPG)
Tie an overhand knot forming a loop.
![a1.jpg](/proxy/?url=https://content.instructables.com/F3E/XOOR/KI34UZXA/F3EXOORKI34UZXA.jpg&filename=a1.jpg)
![P1010004.JPG](/proxy/?url=https://content.instructables.com/FQ6/PNTG/KI34UZWO/FQ6PNTGKI34UZWO.jpg&filename=P1010004.JPG)
Bring B to the right on top of the loop.
![a2.jpg](/proxy/?url=https://content.instructables.com/F7J/HHAS/KI34UZXE/F7JHHASKI34UZXE.jpg&filename=a2.jpg)
![P1010005.JPG](/proxy/?url=https://content.instructables.com/FUD/Y457/KI34UZWQ/FUDY457KI34UZWQ.jpg&filename=P1010005.JPG)
Bring A to the left below the loop.
![a3.jpg](/proxy/?url=https://content.instructables.com/F1H/LYSX/KI34UZXQ/F1HLYSXKI34UZXQ.jpg&filename=a3.jpg)
![P1010006.JPG](/proxy/?url=https://content.instructables.com/FSB/BOY8/KI34UZWS/FSBBOY8KI34UZWS.jpg&filename=P1010006.JPG)
Bring A across and down through bight a.
![a4.jpg](/proxy/?url=https://content.instructables.com/FNO/XDS1/KI34UZXT/FNOXDS1KI34UZXT.jpg&filename=a4.jpg)
![P1010008.JPG](/proxy/?url=https://content.instructables.com/FTO/P9T3/KI34UZWW/FTOP9T3KI34UZWW.jpg&filename=P1010008.JPG)
Bring B across and up through bight b.
![a5.jpg](/proxy/?url=https://content.instructables.com/FI2/TJR2/KI34UZXW/FI2TJR2KI34UZXW.jpg&filename=a5.jpg)
![P1010009.JPG](/proxy/?url=https://content.instructables.com/F4X/Y06T/KI34UZWZ/F4XY06TKI34UZWZ.jpg&filename=P1010009.JPG)
Bring A up through bight a.
![a6.jpg](/proxy/?url=https://content.instructables.com/FTZ/IYGE/KI34UZY4/FTZIYGEKI34UZY4.jpg&filename=a6.jpg)
![P1010010.JPG](/proxy/?url=https://content.instructables.com/F6K/V6OS/KI34UZX0/F6KV6OSKI34UZX0.jpg&filename=P1010010.JPG)
Bring B through bight b.
![P1010011.JPG](/proxy/?url=https://content.instructables.com/F6R/DFXV/KI34UZX3/F6RDFXVKI34UZX3.jpg&filename=P1010011.JPG)
![P1010012.JPG](/proxy/?url=https://content.instructables.com/F77/KTGX/KI34UZX6/F77KTGXKI34UZX6.jpg&filename=P1010012.JPG)
![P1010013.JPG](/proxy/?url=https://content.instructables.com/FO8/0EDJ/KI34UZX8/FO80EDJKI34UZX8.jpg&filename=P1010013.JPG)
Tighten slowly