Modifiable Lap Desk

Have you ever found yourself using a normal lap desk and then all of a sudden, your stuff falls off of it. Well not anymore, with this new and improved lap desk, all of your worries of things falling off are gone. As I was trying to figure out what to remake, I was using a normal lap desk and my computer fell off about two times and my mouse fell four times. That is when I got the idea to make a modifiable lap desk so that people don't have the same problem that I did. This Lap Desk is modified so that it can be changed to however you would like it. The main reason as to how that is possible is because that each part besides the attachable ring use magnets to hold each part together. the reason for why it's made like this is so that the person using it can change it to however they would like to use it. Due to it using magnets, it can be taken apart to save space and storage. The magnets are strong enough to hold the parts together but in certain spots and weak enough to not effect electronic devices.

Without the attachable ring and walls the dimensions are 590 mm wide, 400 long, and 55 mm tall.

If this were to actually be mass produced, I believe that a reasonable price for it would be at least $40 USD due to all of the extra stuff compared to a normal lap desk.

• Two small plastic walls
• One long plastic wall
• One main base plate
• One bean bag base
• And one plastic attachable ring

For the first step, attach the left and back walls together

Now for step two, attach the right wall to the back wall

For this step attach both bases together

Now finally attach the walls to the main base.

If you want to, you can attach the ring through the holes in the main base and lock the ring together using the Velcro on the ends of the ring. This is if want to for some reason, walk with it or for more support.