Mobile Stand Using Scrap Wood

Take two scrap wood pieces in given dimension and cut them at 60 degree angle from one end such that only half part remain there.

• Approximately 3.5x0.5x0.5 inch size scrap wood pieces.
• Wood glue
• Toothpicks
• Wooden dowel
• Wood polish

Glue both pieces using any wood glue and clamp them. Let it dry for a day.

Make the corners smooth and rounded using a sand paper and knife.

Drill four holes and fix tooth pick pieces.

Make a 0.5mm hole in center where the two pieces have joined.

If not available, make a wooden dowel (pin) using a bamboo stick and make it smooth. You can also use Wooden Skewers/BBQ Sticks Seekh.

Cut them in proper length and polish the stand using any wood polish or danish oil.

Your wooden mobile stand is ready!

You can make some other designs also.

Thanks.