Mobile Phone Mount for Classic Cars

by Tessi70 in Workshop > Cars

5992 Views, 62 Favorites, 0 Comments

Mobile Phone Mount for Classic Cars

DSCF1371.jpg

That's what this instructable is about.

There was no stylish phone mount for my Iphone available.

Though, I decided to make it myself.

Milling the Pieces

IMG_1090.jpg
IMG_1091.jpg
IMG_1092.jpg

I started with cutting hardwood to the right size.

In order to get accurate edges, I made a fixture as a guide for the mill.

At first I milled the outlines with a rounded milling tool

Further Milling

IMG_1093.jpg

Then I milled down the whole area, but I left the rounded outlines untouched

Create a Window for the Home Button and the Display

IMG_1094.jpg

I drilled a hole for the home button and tapered it for easier access and saw out a window for the display

Glueing Together What Belongs Together

IMG_1095.jpg

Before glueing the two parts together, I created room for the lightning plug in the bottom of both shells.

I used two component epoxy adhesive to fix the connector and the two shells together.

Finished Item

DSCF1373.jpg

after sanding and oiling the surface I realised that I choosed the wrong wood.

But anyway, I am quite happy with the first attempt.

I attached it with two screws and an aluminium angle bracket to the dashbord.

It works flawlessly, no matter how hard I drive through the curves. :)