Miter Saw Workbench

Here you will find my new miter saw workbench. This is Shanty-2-Chic's design and it is great. I modified a few measurements to fit my saw and changed the compartments a little on the top. You can find the full instructions on Shanty-2-Chic's website.

This step I made the legs. Photo shows the legs screwed together.

Next I made all of the cuts for the frames.

I assembled the top and bottom frames as shown in the photos.

Next I attached the legs to the bottom frame using wood screws.

Next I added the plywood to the bottom frame.

I flipped the unit on its top to add the top frame and casters.

Next I put my Miter Saw on the bench in the location I wanted. I then added the fences.

Next I made the cuts for the compartment sides. I placed them where I wanted and then added the tops.

Miter saw fits perfect.