Miniature Trash Can

This is a miniature trash can, I made it because it would be cute to have a desk trash instead of walking to the trash can. If you want to 3D print it then download the stl files below.

I used Onshape to create a miniature trash can.

To make the base, first I made a sketch on the front plane with the dimensions 0.492 inch (width) and 1 inch (height).

I revolved the face of the sketch with full round.

After revolving the sketch, go to the top plane and shell with the thickness of 0.035 inch.

Fillet the bottom of the base with the radius of 0.05.

For the cap, draw the rectangle to be 0.5 inch (width) and 0.1 inch (height) on the front plane.

Just revolve the sketch by full.

Shell the bottom side by so the thickness can be 0.01inch.

For the miniature trash can handle, draw a center point rectangle on the face of the revolve with the dimensions 0.5 inch (width) and 0.05 inch (height).

Extrude the sketch up with the depth of 0.1 inch.

For the opening to hold the handle, make a center point rectangle with the height of 0.05 inch and the width of 0.35 inch.

Extrude and remove through all for the sketch.

For the top edge of the cap, fillet with the radius of 0.01 inch.

For the handle, fillet all the edges that are exposed by the radius of 0.01 inch.

Once put together, you have finished creating a miniature trash can.