Miniature Home

I made a home that is able to sustain 1-2 people and it can be put in spaces where there might not be much room. The square footage of the house is 240 sq ft.

AutoCAD Architecture

Foam Board

Glue Gun

Laser Cutter

The first step in creating the house required me to make the walls. The house itself is 8'x30'x15' in size.

The flooring and stairs get added to make a 2-story mini house. The second story is a loft that covers about half of the house.

Furniture gets added to the 1st floor including a TV set, kitchen with a stovetop, fridge, oven, and dishwasher, and a full bathroom.

The upstairs loft includes a bed and dresser with a railing by the stairs and on the stairs to prevent falling.

Windows are added around the house to allow natural sunlight in the house. There were two doors added inside the house: Door one being the front door, and door two being the bathroom door.

The roof gets added to cover the house.

After adding materials and rendering the house, it is now completed.

Using foam board and the laser cutter to cut the pieces out, I used the hot glue gun to assemble them. The 3d model is complete.