Mini-Weedwacker
This is an electronic miniature weedwacker used to trim grass without taking up much space in your home.
Connect a Motor to a Battery Pack
I used any wire I found and soldered the wires, connecting the battery pack to the motor. This is done in order for the motor to function.
Attach the Top Piece That Will Cut the Grass
Attach a wooden piece to hold the cutters by drilling a small hole in the wood and then insert it into the motor. Attach a cutter by twisting two pieces of wire together and then hot gluing it to the wood.
Cover the Current Weedwacker in Cardboard
Surround and hot glue the weedwacker in cardboard without covering the spinning part and the on/off switch on the battery pack as shown in the picture.