Mini Storage Bottle (fits in the Pocket)

Here is a super way to re-use clear plastic bottle tops and lids.  I have a lot of small craft supplies that I needed clear containers for.  I made this Gatorade bottle into a plastic container for my small buttons. The nifty thing about it is you can custom fit it to the item being stored and it has an easy pour spout!  I would imagine any clear bottle would work as well.  I added some embellishments to cover up the markings on the bottle to make it look nicer for this Instructable.  I also made a smaller version for pills or any tiny items. Both sizes are great to store small items in.  Both sizes will fit into a mans shirt pocket.

Supplies and tools:

• 1 Clear plastic Gatorade bottle or a similar bottle
• 1 Piece of felt
• 1 Small piece of cardboard
• Marker
• All purpose glue 
• Scissors 
• Rick rack
• Buttons
• Small craft items to put in the container when it is finished!

Here are pictures showing how to mark the sizes.  
A custom fit for the article being stored is a plus!  
I used a can to mark mine as shown in the picture, it worked very nicely.

Instructions on how to cut the bottle:

• Now that you have marked the size you want using a knife carefully cut around the mark following it as close as you can.
• Trim the edges with the scissors to smooth out any uneven edges.

Marking and cutting  the cardboard and felt pieces:

• Using the Cut bottle top as a pattern, place it onto the cardboard and draw around the base with a marker.
• Cut out 1 cardboard circle.
• Place the cardboard over the folded felt piece and draw around the cardboard onto the felt.
• Cut out the 2 circles from the marked felt piece.  

Gluing the felt and cardboard:

• Glue one of the felt pieces to the cardboard.
• Turn it over and glue the remaining felt piece to the cardboard.  
• Press firmly to help it stick together forming a tight seal.
• Allow it to dry.  

Glue the embellishments if you wish to add them:

• Glue a button to the lid.
• Glue ribbon or rick rack to the base to cover any ugly edges.
• Fill with small craft items!

For the pill bottle I cut the lid as close as I could leaving enough room to glue a piece of cardboard to.  I glued the cardboard to the bottom and I also glued a button on the bottom to make it stronger.  I added a button on the top to embellish it.  Here are the pictures of the pill bottle.

I just love my new custom craft container!  It is very useful!  I need to ask my friends to save me their plastic bottles!  I rarely purchase them.  I need quite a few for my craft collection.  These were fast and easy to make.  The pill bottle is awesome as well!

Thank you for stopping by and please drop by again!  Until then . . .  .  Have a splendorous day!