Mini Rechargeable Torch

Hello friends, so in this Instructable we are going to make a rechargeable mini torch.

Rather than providing complete steps I uploaded a short video on our Youtube channel which I attached here and its very easy to grab for any DIY maker.

So make sure to check it out.

1. 8mm LED (White) * 2

2. Push Button

3. TP4056 Charging Module

4. 3.7V Li-ion Battery

5. Cardboard Pieces

https://docs.google.com/document/d/14GtbgO6zg2OCEHlIwM1PCvtztL4MUjAGV48OUUJwS54/edit?usp=sharing

1. Take a cardboard piece and make two pair of holes over it.

2. Attach the led on it.

3. Solder the positives and negatives of the led.

4. Place a push button on the cardboard.

5. Take the positive of the led and solder it to the push button.

6. Take the 3.7v Li-ion battery on another piece of cardboard and solder it with the led ground wire and the push buttons positive wire.

7. Solder the joint with the TP4056 module and stick it on the battery.

8. Close the box using cardboard pieces.

Watch the video for any doubts.

Thanks for reading.