Mini Knex Bow
This Knex bow is great. It's powerful, small, and only uses 4 pieces! Please feel free to mod it, but when you do, tell me. I want to try it out!
What You Will Need
You will need:
Assembly
1 rubber band (I used a #33, but whatever works is good.)
2 orange connectors
2 white rods
Ammunition
1 gray rod or whatever works (not shown)
Assembly
1 rubber band (I used a #33, but whatever works is good.)
2 orange connectors
2 white rods
Ammunition
1 gray rod or whatever works (not shown)
Assembly (part 1)
Put rubber band between orange connector prongs like so.
Assembly (part 2)
Put white rod over rubber band and push until white rod is secure.
Assembly (part 3)
Bring rubber band around back of orange connector and repeat part 2 on other side.
Assembly (part 5)
Now loop excess rubber band around back and bring over white rod so it looks like this. (I flipped it around backwards.)
Firing
Put rod (I used a gray one) through center hole and put rubber band on the end. Pull it back and let go to fire. Enjoy!