Mini- Gun Prop

I made this mini-gun prop for halloween. I have yet to figure out what to do with it. Maybe I'll be the terminator for halloween.

What you need:
Telescope
self tapping screws
screw driver

Start by taking the legs off then separate the inside part from the outside part.

Cut the telescope body about 3" from where it mounted to the legs and cut ti again about 4" From where the end screws on.

Next take the inside legs and screw them to the body.

Take the mount thing and put it back where it came from and put a handle on the end.

Next we attach a hose to the back for "fuel". I used an air hose. I put the hose in a backpack to conseal the end.

Now we just need to paint it.