Mini Fog Maker

This is a mini fog maker that I saw on a website and thought I could improve.

Tools you will need:

a Philips screw driver

a Hot glue gun

sizers

a Sharpie

and a knife.

Things you will need:

a Coffee tin

dead 9v Battery

new 9v Battery

Dry ice

and a old computer.

Open up the computer and find the fan,

unscrew it with your philips and free it from the computer.

Cut the end off of the wire and pull the rubber off the wire close to the end.

Then find out which wire is - & + by setting a wire on the + of the battery and a different wire on the -. Hint(The black is always -)

Then cut the other wires off.

Grab your Coffee tin and pull the lid off.

Then set your fan on the lid and trace it with your sharpie.

Cut the hole a bit smaller than you traced and hot glue your fan pointed down.

Cut the case off of your OLD battery and rip the plugs off.

Take the negative wire and hot glue it to the positive lead,

and vise-versa.

Put something round on it and cut it with a knife.

Put a cup of hot water in it and some dry ice,

then turn it on and enjoy!