Mini Coffee Shop
A quarantine project inspired by DIY mini houses. In this project, I tried to make the physical model have a texture that the digital one, that's why a problem occurred since my filament was limited.
The total print hours for all projects is approximately 11 hours. Using medium quality.
Desing Link : Tinkercad.
Supplies
3D printer.
2D printer.
White, brown, wood, black and yellow filament.
contact glue
hot glue.
Color papers.
Base.
.jpeg)
Cut one piece of polystyrene and three of cardboard, two of the same size and one for the step.
glue them and line them with wood prints.
polystyrene size: 85mmx140mm.
cardboard size:100mmx100mm.
Walls, Door and Windows.
Glue all the piezes with hot glue.
Planter
.jpeg)
Glue a green pieze of paper in the planter and glue it in the floor.
Sing and Awning.
.jpeg)
Assemble sing and stick it on top of the front likewise with the awning.
Armchair.
.jpeg)
.jpeg)
Assemble and place at the bottom
Counter.
.jpeg)
.jpeg)
Cut the paper in square piezes and stick it to the white part, glue the other piezes and place it.
Shelves and Blackboard
stick all the pieces on the walls.
Books and Frame.
.jpeg)
Print book covers and stick them to the pieces , place them and ready.
Jars
Cut piezes of papers and stick them.
Coffee Machine.
.jpeg)
Stick all the piezes and place it in the counter.
Stool.
.jpeg)
stik them and place it next to the counter.
Ceiling and Lamps.
.jpeg)
Stick all the parts and place it in the right top. you can put led´s in it.
Ready
Your mini coffee shop is finished, you can find mistakes because i am not very good at english.