Mini Christmas Tree Made With ATtiny13a and Mini Breadboard.

While the whole street is colored with Christmas, I made a small Christmas tree with ATtiny13a and small breadboard. I found cute little case at the 100 yen shop. the case was a dome ornament kit. I put a small Christmas tree in the case. Do not you think it is is cute?
Make it happy:-)

I wrote in a program at ATtiny13a using Arduino IDE used version 1.06 and Arduino core for Attiny13.

Fuse bit :hFuse = 0xFF, lFuse= 0x7A (interne 9.6 MHz clock)

1x ATtiny13a
1x Mini breadboard
1x 150 ohm resistor
1x 3mm Red LED
11x 3mm Green LED
Jumper wire

Please also refer to the video for making.

Power supply uses 5V from USB. Please be careful with polarity.

I put a small Christmas tree in the dome ornament kit I found in the 100 yen shop.
I think that a small bottle is also cute:-)

Done!
have fun :-)