Mini Lego AK-47
This will show how to make a mini model of an AK-47 machine gun out of legos.
The Pieces
Here are the pieces needed.
The Ammo Clip
Attach the black side coupling brick to the 1x2 plate as shown.
Add the curve brick next to that.
Stick the vent brick on top.
The Barrel
Attach a clamp to the brown square.
Put a black square on the clamp.
Put the two cylinders on the square.
Put the small rod in the hole in the top cylinder.
Attach the finished part to the ammo clip.
The Stock
Put the brown side coupling brick on the slope piece.
Put the black stud on that.
Put a clamp on that.
Clip the pistol into the clamp.
Put a clamp facing away from the last one.
Put the finished stock on the back of the ammo clip.
The Scope
Put the antenna through the top of the cone as shown.
Done!
Clip the scope to the gun as shown.
And your done!
And your done!