Minecraft Steve Head

This project is perfect for anyone who likes Minecraft. It could be as a prop for you room, a costume, or just fun to make.

cardboard

paint

laser cutter (optional)

hot glue gun

exacto knife

cardboard scissors

pencil

paint brushes

cup of water

If you have access to a laser printer you can use my file to print out 5 12x12" squares. Otherwise you can use a ruler to measure it out by hand. You will need enough cardboard for all of that.

Cut the squares on the laser printer or cut them by hand. You need 5 squares.

grab your hot glue gun and start gluing the squares together till you get a box that you can put on but leave the bottom open

draw out two eye holes, poke a hole in the spots of the eyes then use the Exacto knife to cut out the eyes

you will paint the face then the top and back then the sides 2 coats of paint for each. you can customize it if you would like to.

top =brown

back = brown

sides = brown

face =brown white light brown

then you will cut five pieces of cardboard into rectangles so it sits better on your head. it does not have to be a specific size just pieces that is like the picture then glue it in

it's done go ahead and put it on. enjoy your steve Minecraft head :)