Minecraft Diamond Ore Lamp
Hi All,
In this article, I will share how to create a Minecraft diamond ore lamp.
This is a simple project, takes just a few hours for your room or for Halloween
Supplies
- 3d Printer
- LR44 button cells (3)
- Metal wire
- 3 blue LEDs
- a small switch
- Butter paper or baking paper
- Super glue
- cutter
3d Printing
- Download the STL file from here
- Printing settings
- 0.2 Layer height
- White PLA
- Support: Everywhere
- Infill: 10% Grid
Circuit
- Fix hard metal wire to make connector
- Place three Lr44 batteries as shown
- Now solder 4 blue LEDs on metal wires in parallel
- Add the switch and solder batteries connectors, leds and switch as shown
- Test LEDs before and after soldering
Assembly
- Cut 6 pieces of butter paper 65x65 mm
- Using super glue paste on the inside of the box as shown
- Put the lid over the box and tape it using transparent tape
- We are done. Switch on and decorate your room or Halloween