Minecraft Block Light
Minecraft Block light
Supplies
Wood(1/8 Hardboard panel), Plexiglass, sandpaper, drill, jigsaw or wood chisel, wood glue or hot glue, saw to cut the wood
Cut the 6 12'' Squares
Make a Line Every 3/4" on Both Sides So You Get 16x16 Squares
Cut Out the Squares So the Lights Can Go Through
I used a drill in the middle of the squares then I used a wood chisel and file to make it square
Put the Sides Together and Use Tape to Keep the Shape and Then Glue the Inside So You Cant See Glue
Next Paint It. I Used a Stone Grey Spray Paint
Next Take the Plexiglass and Sand It on One Side So You Cant See Through It
Glue the Plexiglass Into the Block Over the Squares You Cut Out
Next Add Led Strips Inside of the Cube and Then But the Last Piece
There Is the Finished Minecraft Block
