Militarize Your G-shock Watch
by SaiP1 in Circuits > Wearables
23133 Views, 161 Favorites, 0 Comments
Militarize Your G-shock Watch
![348nejs.jpg](/proxy/?url=https://content.instructables.com/FNS/QWIP/I59VYOS7/FNSQWIPI59VYOS7.jpg&filename=348nejs.jpg)
For this tutorial, I am going to teach you how to change your G-shock's module into a Military Red Eye Version. Some might say its as easy as putting a red plastic cover infront of the module, but that's not it. We want it clean and legit. We want to modify the look and make it a badass military style watch. I already gave up looking for that Polarizing Film (which is unfortunately only available online) that can be used to stealth the display of your G-shock.
I ued my old G-shock G2110-1S for this tutorial
Prepare Your Tools
![34rx253 (1).jpg](/proxy/?url=https://content.instructables.com/FGB/5TU4/I59VYOQ9/FGB5TU4I59VYOQ9.jpg&filename=34rx253 (1).jpg)
![mmslg4.jpg](/proxy/?url=https://content.instructables.com/FPY/G0LT/I59VYOTS/FPYG0LTI59VYOTS.jpg&filename=mmslg4.jpg)
First, prepare the necessary tools that you need to disassemble your G-shock watch.
a. Anti-Magnetic Metal Tweezers
b. Precision Screws
c. Plastic Folder of any color (must be transparent enough that light will pass through it - I chose red to give that Military look - you can also print out camo on an acetate)
d. Cutter or Scissors
Disassemble
![343okk8.jpg](/proxy/?url=https://content.instructables.com/F9P/4QM5/I59VYORD/F9P4QM5I59VYORD.jpg&filename=343okk8.jpg)
1. Remove the Straps
2. Open your G-shock module by removing the screws of the Stainless Steel Plate (back cover)
3. Make sure you save your gasket
4. Remove the module rubber protector
5. remove the whole module
6. remove battery
Module Disassembly
![2qdmkco.jpg](/proxy/?url=https://content.instructables.com/FFQ/HQVP/I59VYOO1/FFQHQVPI59VYOO1.jpg&filename=2qdmkco.jpg)
![28gyoh2.png](/proxy/?url=https://content.instructables.com/FMO/K4BE/I59VYOQ3/FMOK4BEI59VYOQ3.png&filename=28gyoh2.png)
5.1 removed the metal protector (it will expose the sensitive parts of the module so handle with care)
5.2 follow the diagram for easier understanding of the module's parts
5.2.1 make sure that you handle the illuminator spring contacts carefully. (they might sprung out of nowhere)
Dial Color Replacement
![2yvnybq.jpg](/proxy/?url=https://content.instructables.com/FIN/OV0O/I59VYOOL/FINOV0OI59VYOOL.jpg&filename=2yvnybq.jpg)
5.3 remove the dial color and trace it on your colored acetate, plastic or transparent folder (mine is red for that military look)
5.4 put the traced portion as a replacement for the stock color (this is the magic)
5.5 assemble your module (follow diagram again)
7. Put the batteries again (if the led wont show the time, then touch the AC with + of battery using your metal tweezers)
8. Put the whole module back together
9. Put silicon gel on your gasket (if you dont have any, I think petrolume gel will do)
10. Put back the module rubber protector
11. Screw down the back plate, but dont overdo the screws.
12. Put the straps
13. And take that wristshot!
The Final Look
![28cmz39.jpg](/proxy/?url=https://content.instructables.com/F0A/QWFL/I59VYOP0/F0AQWFLI59VYOP0.jpg&filename=28cmz39.jpg)
![348nejs.jpg](/proxy/?url=https://content.instructables.com/FYB/9SXZ/I59VYR33/FYB9SXZI59VYR33.jpg&filename=348nejs.jpg)
Tada!!!