Mike Wazowski Wall Piece

This is a Mike Wazowski model I made a while ago. It is really easy to make and involves the simplest tools and resources. The motive of this instructable is not to teach but to inspire.

The model is made up of 2 plastic balls
you will need a
-football size green plastic ball
-a tennis ball sized white plastic ball
-paint
-black and white paper
-Super glue or a glue gun

Tools required
-Cutter

-Cut the ball in half carefully and use the neater half. Keep it aside.

-Do not discard or damage the other hemisphere,we need both

-With the half with which you are left,scale and mark the arms and legs

-Cut them out.

-You might not wanna cut the arm in a single piece because of the curvature.

-I added an elbow piece behind arm

-Properly scale and cut out the mouth from a black piece of paper and paste a teeth cutout from a white paper on it at the bottom.

-Cut the white ball 1-2cm away from the middle else the eye would be really bulgy. Uniformly cut the ball and use the smaller portion for the eye .

-Cut out the horns from the waste of the white ball

-Glue the mouth to the ball

-Glue the horns

(for gluing 2 parts perpendicularly, you can fold the part at the top and then glue it,however in this case you should use a 3rd extra part like a cardboard piece which can be bent in half at 90 degrees,glue both the parts on each of the halves and do use a strong glue)

-For the eye,paint a blue iris on the inside and the black pupil on the outside

-Glue the eye to the head

-Paint the toenails black or use a marker

-Glue the arms and legs

and TADAAA....Welcome Wazowski

-if you use it as a wall piece,make 2 holes at the edge along the diameter of the ball and connect them with an aluminium wire and hang our monster by the wire on the wall.

This is a really easy and a learning project and has a vast potential. You can make your own models and do post pictures .