Microbot Kit Experiment EHMS

My name is Willow Williams and I'm 8th grade. I made this instructable in robotics class in EHMS.

The supplies you would need is a micro:bot kit. Look at the photo for reference.

Motors: Get the motors and motor mounts to attach together. Make sure to put the wires under, at the center of the motor mounts and not over. Lastly attach them to the first chassis (main robot board).

Wheels: Attach the wheels on the side of the chassis. Make sure to make them tight.

Line sensors: get the line sensors and attach them all together. Attach the follower boards to the line follower mount. Add the wires (color by: red, orange, yellow).

Main bodies of the robot: Get the other chassis and nub casters. Put them on designated spots. Look at picture for reference. Also make sure to move around the wires so it comes out of the holes from the top chassis.

Microbits: Get the micro:bit, moto:bit, and mounts. Put the mounts on the designated spots. Look at picture for reference. Get the micro:bt and moto:bit, put them together but sliding the micro:bit into the moto:bit. Lastly put the wires on the inputs and get the battery pack and put AA batteries in all slots. Put it under the robot if u want.

You will be making driving and turning code. Follow the code from the picture.

Get your microbit and a cord to connect the code.

See if the robot works.