Micro LED Flashlight

This is a very simple build. All you need is

• three LEDs
• two 1.5 volt or a single 3 volt button cell battery
• electrical tape
• a few minutes time

1. Hold all three LEDs at their top.
2. Wrap electrical tape around the three long wires (anode, +). Leave the ends blank.
3. Wrap electrical tape around the three short wires (cathode, -). Leave the ends blank.

• Wrap electrical tape around the button cells. Leave the top blank. I left the minus pole blank.

• Attach the LEDs to the battery. Remember, I have left the minus pole blank. Therefore, insert the longer wires (+) of the LEDs between the plus pole of the battery and the electrical tape
• Fix the longer wires of the LEDs to the battery by using electrical tape
• The shorter wires of the LEDs should be straight above the minus pole of the battery without touching it

• Congratulation your micro LED flashlight is now finished!
• You turn on your new flashlight by pressing the shorter LED wires on the minus pole of the battery.