MiOYOOW 4-Digit Rechargeable Digital Clock, SMD SMT DIY Electronics Kit

You Wanna Experience Challenging SMD Electronics Soldering? Hey, look here. This Digital Clock DIY Kit is the best choice!

Features：

1>. Four Display Mode: Time, Time/Temperature, Time/Date/Week/Year, Temperature

2>. Automatic Brightness Adjustment: Built-in photosensitive sensor which can automatically adjust the brightness of the display screen. Users can also set 1-15 levels of fixed brightness.

3>. Dual Alarm Clock: Built-in 2 sets of alarm clocks. Users can ON or OFF Alarm1 or Alarm2 according needs. It can be turn on at the same time or only one alarm clock can be turn on.

4>. Stopwatch: Record minutes and seconds after start.

5>. Countdown: Set the countdown as required. Maximum time is 99:59.

6>. Voice Hourly Report: Buzzer alarm prompt 5 times on hour.

7>. Motor Vibrate: Motor vibration prompt when pressing the buttons.

8>. Power-down memory: The time and set parameters will run automatically after installing the built-in battery CR1220 without re-calibrate and setup.

Installation Tips:

1>.User needs to prepare the soldering tool at first.

2>.Please be patient until the installation is complete.

3>.The package is DIY kit.It need finish install by user.

4>.The soldering iron can't touch the components for a long time(1.0 second), otherwise it will damage the components.

5>.Pay attention to the positive and negative of the components.

6>.Strictly prohibit short circuit.

7>.Install complex components preferentially.

8>.Make sure all components are in right direction and right place.

9>.Please wear anti-static gloves or anti-static wristbands when installing electronic components.

Please be more patient!