Metal and Wood Shelve
by tristan.barber.21 in Workshop > Metalworking
310 Views, 4 Favorites, 0 Comments
Metal and Wood Shelve
- 1' Tubing
- 4 sets of 2'-1''
- 4 sets of 1'-2''
- 4 sets of 11''7/8
- 2 sets of 2'-0 1/2
- 6 sets of 3'-8'
- wood
- 3 sets 1'-1 3/4 x 3'-7 3/4
Cut Your 1'' Tubing to the Measurement Needed
- you will need:
- safety glasses
- gloves
- cutoff wheel
- grinder
Get Your 2'-1'' and 1'-2''
Weld Cross Pieces On
Get Your 3’-1’’ Peace Weld to the Top of the Shelf
Weld Bottom Shelve on
Weld Your Bottom Shelve on to the Bottom of the Cross Piece Then Weld Your Middle Shelf in Between Your Top and Bottom
Weld Your Tabs Onto Tubing
Weld Your Tabs onto the Bottom of Your Tubing to Hold Up Wood.
Cut Wood to Fit Into Tubing
