Metal Belt Clip (For Measuring Tape) - Made @TechShop!

Measuring tape is expensive these days, especially ones with belt clips.

I got this small one from a hardware store and thought I'd make one myself

Note: Steel was probably not the best material because the MT itself was aluminum.

In the future I will also use a longer/wider screw to securely hold down the clip better.

Materials:

Measuring Tape

Sheet Metal

Paper/Post-it

Tools:

End Mill

Vice

Pliers

Mallet

Sheets on sheets on sheets

Measure the MT

Measure your belt

Use a pen/pencil to outline where the screw hole is

Fold the Paper accordingly

Cut out the holes for the screw and slot to reach said screw

Mark.

1/16" & 7/16" End Mills

Mark where you want the fold to be and keep in mind the tension while bending

Clip it your belt and do a dance!

https://www.techshop.ws