Meshmixer-among-us

Screen Shot 2021-10-03 at 11.25.23 PM.png

Screen Shot 2021-10-03 at 11.30.33 PM.png

Screen Shot 2021-10-03 at 11.30.13 PM.png

Screen Shot 2021-10-03 at 11.30.46 PM.png

Screen Shot 2021-10-03 at 11.34.51 PM.png

I picked three models from TurboSquid and SketchFab, and mixed them together.

The first picture is the screenshot of the final product

The body is the among us character, the legs are from a labrador retriever, and the nose is from a monster.

There are links to the original sources, including the authors.

the ears: https://sketchfab.com/3d-models/aphmau-werewolf-ea...

the legs: https://www.turbosquid.com/3d-models/labrador-retr...

the body: https://www.turbosquid.com/3d-models/3d-model-char...

the nose: https://www.turbosquid.com/3d-models/3d-limited-pr...

Add Ears

Screen Shot 2021-10-03 at 3.34.33 PM.png

Screen Shot 2021-10-03 at 3.34.51 PM.png

Screen Shot 2021-10-03 at 3.35.14 PM.png

I imported two sources together, Boolean Union them, and then combined them together. Then, I used the Sculpt tool to smooth out the connection part.

Adding Legs

Screen Shot 2021-10-03 at 3.40.25 PM.png

Screen Shot 2021-10-03 at 3.41.45 PM.png

Screen Shot 2021-10-03 at 3.49.28 PM.png

I used the Plan Cut tool to cut the retriever's body and the character's legs, and then combine them together with the boolean union tool.

Adding Nose & Smoothing

Screen Shot 2021-10-03 at 11.11.28 PM.png

Screen Shot 2021-10-03 at 11.14.35 PM.png

Screen Shot 2021-10-03 at 11.16.47 PM.png

Screen Shot 2021-10-03 at 11.16.16 PM.png

Screen Shot 2021-10-03 at 11.21.07 PM.png

Moving on to the next step, I wanted to add a nose to the body, so I cut the nose from the monster and moved it to the proper place, combining them together.

But I think the lower part of the body is not smooth enough, so I use the Select tool to select the legs and part of the body, and Edit--Smooth them a bit.