Mason Jar: Hanging Bathroom Organizer
by DIYg in Craft > Mason Jars
24519 Views, 139 Favorites, 0 Comments
Mason Jar: Hanging Bathroom Organizer
![bathroom.JPG](/proxy/?url=https://content.instructables.com/FPB/WFZP/HJKBVZOR/FPBWFZPHJKBVZOR.jpg&filename=bathroom.JPG)
![sanddown.JPG](/proxy/?url=https://content.instructables.com/FIO/D8F1/HJKBVZPH/FIOD8F1HJKBVZPH.jpg&filename=sanddown.JPG)
What You'll Need:
-scrape piece of wood (found mine in a scrape bin at a hardware store for fifty cents!)
-wood stain
-polyurethane
-3- 2 1/2" hose clams
-3- self drilling sheet metal screws 6 x 5/8"
-3 1/2 pint wide mouth mason jars
- 16 lb. test 3M command hooks
-scrape piece of wood (found mine in a scrape bin at a hardware store for fifty cents!)
-wood stain
-polyurethane
-3- 2 1/2" hose clams
-3- self drilling sheet metal screws 6 x 5/8"
-3 1/2 pint wide mouth mason jars
- 16 lb. test 3M command hooks
Sand Down Wood & Stain
![sanddown.JPG](/proxy/?url=https://content.instructables.com/FKT/M7MS/HJKC43G3/FKTM7MSHJKC43G3.jpg&filename=sanddown.JPG)
-Sand down your scrap wood till it's nice and smooth.
-Apply the wood stain of your choice
-Wait for the stain to dry then seal it up with a polyurethane coat. Two coats is recommended.
-Apply the wood stain of your choice
-Wait for the stain to dry then seal it up with a polyurethane coat. Two coats is recommended.
Screw on Hose Clamps
![hoseclamp.JPG](/proxy/?url=https://content.instructables.com/FW9/GHGN/HJKBPR7T/FW9GHGNHJKBPR7T.jpg&filename=hoseclamp.JPG)
-Take a level and place nice equal dots where the screws will go.
-I used some self-drilling screws because it was a lot easier just to zip through the metal on the hose clamps.
-Screw on the hose clamps. Simple!
-I used some self-drilling screws because it was a lot easier just to zip through the metal on the hose clamps.
-Screw on the hose clamps. Simple!
Tighten Up the Hose Clamps
![jars on wood.JPG](/proxy/?url=https://content.instructables.com/FNT/EL48/HJKBY2O8/FNTEL48HJKBY2O8.jpg&filename=jars on wood.JPG)
-Place the mason jars in the hose clamps and tighten them up