Marshmellow Shooter

How to make a Marshmellow shooter.

Gather supplies
3' - 1/2" PVC pipe
2 - 1/2" PVC Elbow
2 - 1/2" PVC Tee
2 - 1/2" PVC slip cap

Cut PVC Pipe to the following sized
1 - 7" piece
1- 5" piece
5- 4" pieces

Add the 5" piece into one of the Elbows.
This will be where you insert the marshmellow.

On the open side of the elbow from step 3, insert a 4" piece of PVC

Insert the open end of the 4" pieces of PVC pipe from step 4 into one of the PVC tees.

Insert a 4" piece of PVC pipe into the left side of the tee used in step 5. Should be on the same side as the place you will insert the marshmellow.

Attach a PVC elbow to the 4" piece of pipe used in step 6. Elbow open end should be pointed down.

Insert a 4" piece of PVC pipe into the open side of the elbow used in step 7.

Add a PVC cap onto the 4" piece of pipe used in step 8. This has created the back handle.

Insert a 4" piece of PVC into the remaining open end of the tee used in the previous steps.

Add the remaining PVC tee to the 4" PVC pipe used in the previous step. Then repeat the process of the previous steps to create the front handle. Then insert the 7" piece to the open end of the PVC tee to complete the Marshmellow Shooter.