Marshmallow Gun
You Will Need:
1- 7" piece of 1/2" PVC pipe
6- 3" pieces of 1/2" PVC pipe
2- 1/2 90's
2- 1/2 T's
2- 1/2 caps
Mini Marshmallows
Note: I used paper towels to fill the handles.
1- 7" piece of 1/2" PVC pipe
6- 3" pieces of 1/2" PVC pipe
2- 1/2 90's
2- 1/2 T's
2- 1/2 caps
Mini Marshmallows
Note: I used paper towels to fill the handles.
Putting the Pieces Together
Lay one 3" down and connect a 90 to it. On the other part of the 90, connect a 3". Put a T on it, on both sides of the T, put a 3". Put a 90 where shown, and onthe other 3", put a T. On the 90, put a 3" then a cap. On the bottom of the T, put a 3", then a cap. Also on the T, put the 7" on.
If You Choose to Put the Paper Towels In,
Put the paper towels in the places shown below, if you chose to do so.
The Complete Gun
Your now finished! You put the marshmallows in where shown.