Mario Warp Pipe Pencil Holder
by stillash in Living > Organizing
3005 Views, 20 Favorites, 0 Comments
Mario Warp Pipe Pencil Holder
![Mario World Warp Pipe Pencil Holder || How To](/proxy/?url=https://content.instructables.com/FZ0/XLVV/JDKKFZ8U/FZ0XLVVJDKKFZ8U.jpg&filename=Mario World Warp Pipe Pencil Holder || How To)
![Screen Shot 2018-02-12 at 10.56.40 PM.png](/proxy/?url=https://content.instructables.com/FSQ/JXUQ/JDKKG5W5/FSQJXUQJDKKG5W5.png&filename=Screen Shot 2018-02-12 at 10.56.40 PM.png)
I LOVE video games. I always have, Im not the best but im also not the worst. Mario has always been a favorite of mine and I needed a pencil holder for my desk. So i decided to make one look like a warp pipe form the Mario games.
Tools & Materials
2" pvc pipe
2" couplings
2" test end caps
pvc glue
paint
Cutting the Pvc
![Screen Shot 2018-02-12 at 10.52.38 PM.png](/proxy/?url=https://content.instructables.com/FC5/R3XC/JDKKFZHU/FC5R3XCJDKKFZHU.png&filename=Screen Shot 2018-02-12 at 10.52.38 PM.png)
![Screen Shot 2018-02-12 at 10.53.15 PM.png](/proxy/?url=https://content.instructables.com/F61/UAKL/JDKKFZQP/F61UAKLJDKKFZQP.png&filename=Screen Shot 2018-02-12 at 10.53.15 PM.png)
![Screen Shot 2018-02-12 at 10.53.32 PM.png](/proxy/?url=https://content.instructables.com/FPP/HB3W/JDKKG08G/FPPHB3WJDKKG08G.png&filename=Screen Shot 2018-02-12 at 10.53.32 PM.png)
This project is super easy and cheap!
I used my miter saw to cut the pvc pipe to length. This could be done with a hand saw and you would propably get nicer edges.
The couplings are dangerous to cut on the miter saw. So i stuck it on the end of the pvc and either cut it flush to the pipe or left a bit of a gap.
Watch your fingers!
Gluing the Pieces Together
![Screen Shot 2018-02-12 at 10.53.41 PM.png](/proxy/?url=https://content.instructables.com/F3V/T5UV/JDKKG0Q5/F3VT5UVJDKKG0Q5.png&filename=Screen Shot 2018-02-12 at 10.53.41 PM.png)
![Screen Shot 2018-02-12 at 10.53.59 PM.png](/proxy/?url=https://content.instructables.com/FNN/HOXE/JDKKG17U/FNNHOXEJDKKG17U.png&filename=Screen Shot 2018-02-12 at 10.53.59 PM.png)
![Screen Shot 2018-02-12 at 10.54.11 PM.png](/proxy/?url=https://content.instructables.com/FIA/16T8/JDKKG17V/FIA16T8JDKKG17V.png&filename=Screen Shot 2018-02-12 at 10.54.11 PM.png)
![Screen Shot 2018-02-12 at 10.54.35 PM.png](/proxy/?url=https://content.instructables.com/F79/B95P/JDKKG17W/F79B95PJDKKG17W.png&filename=Screen Shot 2018-02-12 at 10.54.35 PM.png)
![Screen Shot 2018-02-12 at 10.55.03 PM.png](/proxy/?url=https://content.instructables.com/F2Q/LANA/JDKKG1GR/F2QLANAJDKKG1GR.png&filename=Screen Shot 2018-02-12 at 10.55.03 PM.png)
![Screen Shot 2018-02-12 at 10.55.12 PM.png](/proxy/?url=https://content.instructables.com/FI2/6PY9/JDKKG1GS/FI26PY9JDKKG1GS.png&filename=Screen Shot 2018-02-12 at 10.55.12 PM.png)
I used black pvc glue since i bought black pvc. My intention was to leave the inside black but then decided to paint the inside.
I spray painted the test caps black and covered them with the black glue.
Then I used a small amount of glue to attach the end cap to the pvc tube.
Once that was dry I then attached the coupling to the pipe with the glue and flushed them up by pushing them together on my work surface.
Painting
![Screen Shot 2018-02-12 at 10.55.31 PM.png](/proxy/?url=https://content.instructables.com/F4C/7NLO/JDKKG1GX/F4C7NLOJDKKG1GX.png&filename=Screen Shot 2018-02-12 at 10.55.31 PM.png)
![Screen Shot 2018-02-12 at 10.55.40 PM.png](/proxy/?url=https://content.instructables.com/FFR/L1QR/JDKKG1GZ/FFRL1QRJDKKG1GZ.png&filename=Screen Shot 2018-02-12 at 10.55.40 PM.png)
![Screen Shot 2018-02-12 at 10.55.50 PM.png](/proxy/?url=https://content.instructables.com/FCV/36UP/JDKKG1YO/FCV36UPJDKKG1YO.png&filename=Screen Shot 2018-02-12 at 10.55.50 PM.png)
I used rustoleum spray paint for this.
It has been a little cold in LA recently so I had some runny painted pvc pipe that took forever to dry.
make sure to spray in light coats.
Enjoy Your New Pencil Holder!
![Screen Shot 2018-02-12 at 10.56.28 PM.png](/proxy/?url=https://content.instructables.com/FEL/3OT7/JDKKG4NY/FEL3OT7JDKKG4NY.png&filename=Screen Shot 2018-02-12 at 10.56.28 PM.png)
These came out looking pretty cool. I am going to make some more in the summer when its warmer so I get a better finish. Let me know in the comments if you liked this project or if you made one.