Manatee Flash Drive

I will be showing you how to create a manatee Flash Drive. You will need
- a flash drive
- oven bake clay
- hotglue

Disassemble the flash drive and place it to one side.
Begin rolling the clay until it is warm and formable

Using pictures on the internet, I made the shape of a manatee. After the basic shape was done, I cut where the flash drive body would meet the head.

I then cut holes where the flash drive should be. I then test fit them. I placed the flash drive in and closed it up.

I baked these in the oven for about 15 minutes at 130° C.

After baking, I let it cool down. I then placed the flash drive into the manatee and super glued it into place. After that, you are done!
(however you can paint it.)