Mammoth's Feet Get Cold (sily Solutions)
517 Views, 1 Favorites, 0 Comments
Mammoth's Feet Get Cold (sily Solutions)
![Screenshot 2020-07-16 at 2.31.36 PM.png](/proxy/?url=https://content.instructables.com/FLY/TIR5/KCP1VF8A/FLYTIR5KCP1VF8A.png&filename=Screenshot 2020-07-16 at 2.31.36 PM.png)
![Screenshot 2020-07-16 at 2.32.01 PM.png](/proxy/?url=https://content.instructables.com/FSC/CYTR/KCP1VF89/FSCCYTRKCP1VF89.png&filename=Screenshot 2020-07-16 at 2.32.01 PM.png)
In this project, the mammoth's feet are literally cold! I added some white boots from the wiz because they will probably keep his feet toasty, clean, and stylish.
Add Mammoth From the Tool Bar
![Screenshot 2020-07-16 at 2.39.03 PM.png](/proxy/?url=https://content.instructables.com/FJP/LFVR/KCP1VFUJ/FJPLFVRKCP1VFUJ.png&filename=Screenshot 2020-07-16 at 2.39.03 PM.png)
To do this, start a tinkercad, and press the" printables" button, then press the button that says "Smithsonian(NEW)"
Select Images
![Screenshot 2020-07-16 at 2.41.14 PM.png](/proxy/?url=https://content.instructables.com/F98/3V4I/KCP1VFWO/F983V4IKCP1VFWO.png&filename=Screenshot 2020-07-16 at 2.41.14 PM.png)
![Screenshot 2020-07-16 at 2.41.08 PM.png](/proxy/?url=https://content.instructables.com/F0T/3SJI/KCP1VFWQ/F0T3SJIKCP1VFWQ.png&filename=Screenshot 2020-07-16 at 2.41.08 PM.png)
I selected four boots from the wiz and one woolly mammoth. Then, I tried to angle it so that it would look like the woolly mammoth was wearing boots!
Group All of the Things Together
![Screenshot 2020-07-16 at 2.44.16 PM.png](/proxy/?url=https://content.instructables.com/FPP/GA33/KCP1VFZR/FPPGA33KCP1VFZR.png&filename=Screenshot 2020-07-16 at 2.44.16 PM.png)
To this, hold shift while you press on each of the images. Then press the group button that looks like an arrow pointing northwest (a bit like ↖️). This will insure that if you accidentally move a boot, it will move the entire shape.
Have Fun!
![smiling-face-with-smiling-eyes_1f60a.png](/proxy/?url=https://content.instructables.com/FM8/CY33/KCP1VG9C/FM8CY33KCP1VG9C.png&filename=smiling-face-with-smiling-eyes_1f60a.png)
This instructable not only details how to make this tinkercad, but how to make ones on your own! Remember to have fun!😊