Making the Connecting Plugs for Macbook and IPhone Charger Interchangeable

All those who have a macbook and a mac charger for your iPhone know the problem: the connecting piece for your socket-outlets *should* be interchangeable, but only the short, direct plug piece really is. The piece with the cord is missing a dent. Or the mobile charger has a tiny bit too much plastic in it. That is what we are going to change. All you need is an electric hot cutter, a screw driver and a bit of patience.

• First, lay the connection socket of your charger free.
• Then turn on your electric cutter so the blade becomes hot enough to use.
• Next, take your electric cutter and cautiously cut the plastic tooth in your charger's socket. The plastic only takes a few seconds to melt, so be quick.
• Now you can either try to use your hands or easily use your screw driver to break the plastic tooth away from its bottom.
• Try on the cord plug. If it fits, you are done – if not, just take away a tiny bit more plastic with your electric cutter.

Congratulations, now your mobile charger is even more versatile than before!