Making a Removable Sternum Strap

So you've got a backpack with a "permanent" sternum strap?
In this instructable I'll show you how to make it removable

For this instructable you will need the following:

• A backpack (of course)
• A dremel or file
• Some sand paper

Use a thin cutting disk and cut carefully until you almost reach the strap.
Repeat for the other side.

Note
You can use an image of a Split Sternum Bar for reference

Now gently remove the sternum bar (it's still a bit hard to do that, but soon it'll be easier).
After both bars are out, use a thicker cutting disk to widen the gap.
I used a different kind of split bar for reference as seen in the pictures.

Sand the imperfections and round the sharp edges a bit.

That's it! You're ready to go!


You can use this new feature to convert from using your backpack for hiking to going to school, office, etc.