Making a Laser Etched Pilsner Beer Mug....I Made It at Techshop
by mmiller52 in Cooking > Beverages
771 Views, 2 Favorites, 0 Comments
Making a Laser Etched Pilsner Beer Mug....I Made It at Techshop
Making a etched beer mug....
TURN OFF the Laser Attach the Rotary Tool
you must turn off the laser to attach the rotary tool to prevent power surge.....
Secure the Oversized Mug on the Jig With Tape
secure the oversized mug on the jig with tape...this keeps it steady while turning
Set Up the Art File You Are Using
Set up the art file you are using....
Print Your Image
Print your image......select print then select Preferences to change the intensity of the laser...hit OK then print for the second time.
Start the Magic
flne tune the placement of the image in the laser interface and hit the magic green button and BAM! watch the magic happen.