Making a Small Aquaponics Kit - Jellyfish

Tools Required:

Wax, measuring tape, screwdriver, scissors, tape, soldering iron & solder, glue gun, heat gun, wire cutters, needle nose pliers.

What's Inside:
Garden Bundle: Laser Cut Panels- Garden Panels: 6pcs - Storyboard, Grow bed base, Sides, Front & Back of garden Tubing, elbows, Tees, zip ties, nuts & screws

IMPORTANT: Make sure to wax all wood before beginning assembly to prevent mold with a natural bees wax & mineral spirit mix which you can make at home or purchase Howards Feed & Wax:

Electronics Bundle: proximity, humidity, photocell, float sensor, temp sensors, copper plates, 1 ohm resistors, wires, PCB pins, heat shrink tubes, paper clips, laser cut sensor kit & mounting adapter, nuts & screws.