Making a Simple, One-Shot Airsoft Gun for Around 2.50 Dollars

This is a fun, easy-to make weapon, and it is fun to shoot. It is great for office and school warfare.

DISCLAIMER:
I WILL NOT BE RESPONSIBLE for anyone or anything getting hurt from this weapons
DO NOT SHOOT AT FACE OR EYES
From personal experience, this thing can hurt from 25 yards away

Have Fun!

--> You'll need a knife, or scissors, or something sharp to cut through a plastic pen with.
--> A classic BIC pen
--> A Cap Gun with a clear barrel
--> Some tape, i recommend using electrical, and do not recommend scotch.
-->Ammo
--> A brain, so you don't end up hurting yourself

Take your cap gun, and take off the little ammo piece where you put the caps in.
-->Take your cut-off pen, wrap some tape around it, and push it in so it sits tightly in the barrel, the back end going over the hammer.

Once you have made sure it is tight, you can pop a bb into it and shoot. But, it may fall out if you don't do this step, and somewhat improve the accuracy, but sometimes the bb wont shoot out.

Take a little metal ring, as shown in the picture, and tape it on the barrel. Be careful not to stop the bb from shooting, or else it wont shoot(obviously)

HAVE FUN!!!!!
This cxan be a last-resort pinch weapons for airsoft; i have been saved by this little bugger three times by now.