Making a Simple Clutch

Today, Im gonna make a simple clutch

It's a simple leather clutch.

It made with a simple design and I used only one metal small stud closure. Hope it helps.

Thanks!

[Leather thickness]

Leather : 2.3t (6oz) Skived edge : 0.8t

Sketching and making the pattern.

Im making pattern and design shape at the same time

Mark on the leather by owl

Cut the leather following the mark

Bevel the edges and apply a gum (Tokonole)

Burnishing with a slicker

Following the pattern, make a two holes on the leather.

Make a stitch holes for tiding behind and cross stitching

I used a strap cutter

I cut an oblique line

Adding creasing line is optional

apply a glue edge area for side panel

Attach edge first, and put center of the round bottom

I used a machine but handstitching is possible 100%

This is the only part of metal (Stud closure 4mm)

This is Punch that can make hole and line same time

Put a strap on the loop , Put it in the stud closure and close

Thanks for watching! =)

If you need the pattern , please come to my youtube channel

Good luck with your project!