Making a Shopper Bag

Today I'm gonna make a Garden Party st shopper bag

★ HOW TO GET A PATTERN ★
Clilcking 'Like' and 'subscribe' Then, Leave an email in your comment.

It's helpful to draw the bag first to visualize

The bottom pattern determines the size of the bag

Cut the leather according to the pattern

Fold the handle in half and sew

Sew 21cm in the middle

Edge-painting on the side of handles

Prepare 8mm thick rope for handles

Tape the ends to prevent them being loose strands

Punch a hole in the center

Put the PP string through the center

Pull it all the way and you can put the rope in the handle

Cut the tip of the rope diagonally

Make one more, and handles are done ~!

Edge-Painting

Prepare the reinforcement

Cut reinforcement 1.5cm smaller than the bottom part

Mark where the handles will be attached

Put the handles and stitch

Cut the lining following the pattern

Put the zipper on the frame

Stitch both sides of the pocket's lining

Attach inner lining with outer leather

Apply bond on the straps for side band

Combine the sides of the main body with side band

Bond and stitch side bands to combine

Put the piping around the bottom part

Make some slits for corners

Sew around the piping

Sew the main body and bottom part to combine

And turn inside out

Stitch around to put bias on the body top

Make a hole for put dot buttons

Tip.

Mark the button's position

before combining body following the pattern

I used 15mm dot button

Thanks for watching! : )