Making a Rust Finish With Acrylic Paint

by nmatthews_1990 in Craft > Costumes & Cosplay

8120 Views, 0 Favorites, 0 Comments

Making a Rust Finish With Acrylic Paint

IMG_0001.JPG
IMG_0003.JPG
IMG_0020.JPG
IMG_0023.JPG
IMG_0021.JPG

I have recently watched my boyfriend pay Legend of Zelda Breath of the Wild on the Nintendo Switch. He is currently playing with the powered up master sword where the blade glows a soft blue. I wanted to practice my fabrication skills before I try powered up Master Sword build. I built the rusty version from the start of the game. More importantly I wanted to try out thing a rusting paint finish. Here are the steps I took for my paint job.

Supplies

​Thin Red Coat

IMG_0004.JPG
IMG_0005.JPG
IMG_0006.JPG
IMG_0007.JPG
IMG_0008.JPG
IMG_0009.JPG
IMG_0010.JPG

Brush on a layer of red paint in the general area you want the rust spots to be. While the paint is still wet take your paper towel and wipe off the red paint. It should leave transparent red stain. Do this as many times as you want. It will depend on how red you would like your rust to be. In my case I just did this layer once. I want to final look to have a darker brown finish but with red undertone.

​Orange Coat

IMG_0011.JPG
IMG_0012.JPG
IMG_0014.JPG
IMG_0016.JPG

I added my orange paint in the same spot as the red paint. One main difference here I use the stippling technique. I tap the end of the brush on the sword to make small dots on each pass. This will blend the paint together and also crate a nice texture that will be similar to rust. Let this layer dry until tacky before moving on to the next layer.

​Brown Coat

IMG_0017.JPG
IMG_0018.JPG
IMG_0019.JPG
IMG_0022.JPG

On this layer I use the same stippling technique. I went pretty heavy with this layer. I wanted the final result to be mainly brown but I wanted some of the red and orange to peak through a bit. I ended up doing two layers of brown to get the result I was looking for. I did let the first layer of brown paint to dry completely before doing my second layer