Making a Blooming Flower From Cardboard

Making a blooming flower from cardboard in spare time is very fun for every body of us.As good as something can have many creativity at one day that we should be happy when do it with our family in holyday.

5 pieces of flower from cardboard

2 pieces of cardboard leaves

1 cup and a lid of plastic material

1 piece from the top of the plastic cup

1 small straw

1 balloon handle

1 steofofoam

2 middle pieces of flowers

1 mecanical pencil

1 little scissor

1 cardboard scissor

1 cutter

1 castol glue

1 glue gun

1 ruler

1 insulation

1 electric solder

Watching video ; https://youtu.be/swl5tKw39kA

1. Summarize the 5 parts of the flower and the petals with cardboard glue

2. So are the two leaves.

3. Take a small straw with a two-piece cutter that fits two holes in a
large straw.

4. Insert two leaf supports on two holes on a small straw.

3. Take a small straw with a two-piece cutter that fits two holes in a
large straw.

4. Insert two leaf supports on two holes on a small straw.

5. Attach the flower handle to the end of the large straw in the hole
that has been made.

6. Install the steofofoam at the bottom at the end of the small straw.

7. Paint sunflowers, stalks and both leaves with attractive colors

8. Put a straw in the glass.

9. Cover the glass with arched cardboard and paint it.

10. Tape the pieces of glass upside down with castol glue as an edge so that the water does not overflow.

11. Lubricate the top of the glass lid with an electric soldering iron for the water that is splashed.

12. Finish the flower is ready to be watered and will bloom.

Watching Video Click Here :

https://youtu.be/swl5tKw39kA