Making Coca-Cola Tank Truck DIY With DC Motor and Recyclable Material
by randomcraft66 in Craft > Reuse
381 Views, 2 Favorites, 0 Comments
Making Coca-Cola Tank Truck DIY With DC Motor and Recyclable Material
![20220914_155241.png](/proxy/?url=https://content.instructables.com/FF0/DP2U/L81MYDT6/FF0DP2UL81MYDT6.png&filename=20220914_155241.png)
![Making Coca-Cola tank truck DIY with DC motor](/proxy/?url=https://content.instructables.com/FQ7/6KK3/L81MYDTN/FQ76KK3L81MYDTN.jpg&filename=Making Coca-Cola tank truck DIY with DC motor)
Making Coca-Cola tank truck DIY with DC motor and recyclable material
Supplies
Material
Wooden stick, DC Motor(3~9V)
Wire, soldering iron, straw
worm gear, spur gear
Coca-cola can
2p swich
9v battery
![20220914_215539.png](/proxy/?url=https://content.instructables.com/F6A/WSS8/L81MYDU2/F6AWSS8L81MYDU2.png&filename=20220914_215539.png)
![20220915_141139.jpg](/proxy/?url=https://content.instructables.com/FOS/729G/L81MYDZ6/FOS729GL81MYDZ6.jpg&filename=20220915_141139.jpg)
First, download the file below and cut it by attaching it to a flat Coke can
Downloads
![20220914_215624.png](/proxy/?url=https://content.instructables.com/FBM/G88N/L81MYDZT/FBMG88NL81MYDZT.png&filename=20220914_215624.png)
Cut along the pattern and fold to make the front part.
![20220914_215721.png](/proxy/?url=https://content.instructables.com/FNC/VGT9/L81MYE1Q/FNCVGT9L81MYE1Q.png&filename=20220914_215721.png)
made a frame and wheels using wooden sticks and a water bottle cap, and made a drivetrain with spur and worm gear motors.
![20220914_215748.png](/proxy/?url=https://content.instructables.com/F3M/NINH/L81MYE26/F3MNINHL81MYE26.png&filename=20220914_215748.png)
The headlight is attached to the can handle.
![20220914_220326.png](/proxy/?url=https://content.instructables.com/FVX/LDD3/L81MYE3F/FVXLDD3L81MYE3F.png&filename=20220914_220326.png)
Attach the convex part of the bottom of the can to the front and back of the oil tank...