Making a Clay Pinch Pot!

So here is an instructable on how to make a pinch pot with clay! (You can buy it online or at crafting stores). Read and enjoy! (If you enjoy, please subscribe

You will need

- tool with pointy end(optional)
-clay (I used Funke brand)
-your hand!(if you don't want your hands to get nasty I suggest using gloves of some sort)

Tear off a chunk of clay from the block(as big as you want your pot)

Roll out the clay into a ball. Press a deep hole into the clay with your thumb, and pinch the clay on the sides if the hole up, to make your pot taller and wider. Once you are satisfied with it, flip over the pot and gently press so that the pot is not lopsided.

Well, this is your pot! You can see some extra steps below, or you wish to be finished, just set it on a high shelf for a week to dry. Once dry, you can take it to a kiln and fire it, glaze it, and fire it again, or just paint the dried pot. See extra steps below!

Go ahead and go pointy tool I mentioned earlier and grab it. Make a design on the side ( or inside!) of the pot. Go crazy with this! Please!

This is my finished pot; glazed and all. Here y'all go!