Make Your Own Shaped Bracelets

by Danger is my middle name in Craft > Jewelry

30647 Views, 61 Favorites, 0 Comments

Make Your Own Shaped Bracelets

5060645467_c8cc821313.jpg
I'm sure most of you have seen those silly bands around.  You know, those colorful, rubber bracelets that are shaped like things.  I'm not usually one to follow fads like this, but I have really wanted one shaped like California.  I'm from California, but I go to school in Massachusetts and I miss my home state a lot.
Both my room mate and I got sugru for the contest, but hers arrived first and she promptly fixed everything in the room and I was at a loss as to what to do with mine.  Until I thought of trying to make my own California-shaped bands!

Materials

5060644431_39779b3813.jpg
Gather Materials
For this project, you will need:
-one sheet of transparency (I think that's what it's called, you can get it at office supply stores) (make sure it's really clean)
-piece of paper with the outlines of the shapes you want to make
-sugru (I found one of the small packets was enough to make 3 bracelets)

Prepare Sugru

5060644579_d89d436b2d.jpg
Put the transparency on top of the piece of paper with the designs you want to make.  Taping it in place would be helpful at this point, but I didn't do that.
Follow the instructions on the packet for preparing and working with sugru.  It will stick to everything! Make sure your hands are super clean to minimize sticking.
After working with the sugru for about 30 seconds, roll it into a long snake shape about 1/8 inch thick.

Shape the Band

5061255340_d86bafecdf.jpg
5061255468_623b3d09ea.jpg
Start making the shape by sticking one end of the sugru shape down to a point around the outline of your shape on the transparency.  The sugru will peel off the transparency later when it's cured completely.  Follow the shape around, pressing the sugru down as you go.  Make sure the ends are securely connected.

In the first picture, you can see that the paper has shifted under the transparency  which can make it difficult to make a good shape.  This is why I should have taped it down.

Let it cure for at least a few hours!

Peel It Off

5060645207_08c7691076.jpg
5061255622_b7a18f2beb.jpg
Let it cure for at least a few hours, and don't put any heavy wear on it for at least 24 hours.  Peel it carefully off of the transparency.

Enjoy Your Silly Band!

5060645617_e537691170.jpg
5060645467_c8cc821313.jpg
Enjoy your custom made shaped bracelet!